image

Shipping Records


Packing LPs

  1. Use proper mailers. LPs and maxi-singles should always be shipped in a sturdy, cardboard mailer (with cardboard inserts) specifically designed for shipping 12-inch records. The length and width of the mailer should both be between 12 1/2 to 13 inches. The height or thickness will depend on the number of discs being shipped. When packing an LP, follow these steps:
     
  2. Place at least one 12" x 12" cardboard insert into the bottom of the mailer box.

  3. Remove the disc (keeping it in its inner sleeve) from the LP jacket and place it next to the jacket in the box. If you have a plastic LP outer cover, place the jacket in the cover, with the disc beside it. This step is very important as it will prevent potential seam splits to the album jacket that may occur from the disc sliding back and forth during transit. (With a sealed LP, you obviously will not remove the disc from the jacket, but you will want to ensure that enough cardboard inserts are placed around the album in order to prevent the disc from sliding back and forth inside its sealed jacket.)
     
  4. Place at least one cardboard insert on top of the LP jacket.
     
  5. Close the box and test for snugness. If there is any sliding around of the box contents, insert additional cardboard inserts until all is snug and tight
     
  6. Don't forget cushioning. For the record to arrive safe and sound, it is imperative that the box contents be securely cushioned with no movement ability!
     
  7. Once a snug fit is achieved, close the box and tape the back and sides with packing tape.

Packing 45s

  1. Use proper mailers. With 45s or 7-inch singles, the same protocol holds as in packing LPs. You'll want to use a sturdy, cardboard mailer (with cardboard inserts) specifically designed for shipping 7-inch records.
     
  2. The length and width of the mailer should both be between 7 1/2 to 7 3/4 inches. The height or thickness will depend on the number of discs being shipped. For 7-inch singles with picture sleeves, you'll want to remove the disc from the picture sleeve and place it in a paper sleeve next to picture sleeve.
     
  3. Doing this will help to ensure that the picture sleeve arrives to the customer free of seam splits. This step is important, as the original picture sleeves of many 45s are worth more than the records

Packing Cassettes, Micros, DATS, Reel Tapes and Videos

  1. These tapes are actually very sturdy by themselves and even more so if they are in cases. You don't need to go overboard packing tapes to ship to us.
     
  2. If you are just shipping a couple of tapes, a Small Flat Rate Box from the Post Office is perfect. Theye are around $6.50 and that includes the postage. Padded envelopes or fine too.
     
  3. IMPORTANT: If you are shipping a single cassette or micro cassette, DO NOT use a letter envelope to send us your cassette. Letter envelopes tend to break open and the tape is lost. Use a padded envelope or small box.
     
  4. If shipping a large amount of cassettes, again a cardboard box is fine, just make sure the box is taped up good.

 


Don't have a Record Mailer?

Here's an Inexpensive Alturnative